OT Laminor Air Flow
OT Laminar Air flow Manufacturers in Chennai
We are the leading company manufacturer & supplier of quality (OT) Operation Theatre Laminar Flow in Chennai.
OT laminar air flow
- • The operating theatre ceiling is the most important part of a hospital ventilation system. Also called UCVS (Ultra Clean Ventilation System), these sophisticated systems are actually a combination of a variety of elements, including gas tight welded pressure chambers, air filter housings or filter grids, HEPA filters, priming illumination and air diffusers.
- • Laminar Flow Ceiling for Operating Theatres
- • to produce a germ- and particle lean area through an unidirectional air flow.
- • The system is specially designed and suited for the use in Operating Theatres.
- • The requirements according to ISO 14644 Standard and NABH Guidelines
Pressure Chamber
- • Air sealed pressure chamber, made out of IS 304 Grade stainless steel 1.2mm thick Sheet
- • Smooth inner surfaces, therefore easy to clean and disinfect during filter changes
- • Special frame system for the integration of the filter frames, the pressure chamber, all required receptacles of the surrounding air flow stabilizers made out of anodized Aluminum.
- • Openings for the supply duct connections
- • Air sealed housing for the integration of the stand of the O.T. light and openings for the service of the O.T. light
- • Aerosol port
- • Port for pressure drop measurement
- • Supply air connections as flange made out of IS 304 Grade stainless steel 1.2mm thick sheet
- • Lateral attached, air sealed, disinfectant resistant varnished with connection flange for external duct installation.
Diffuser- Frame
- • Frame made out of anodized Aluminum profile for the placement of the CG-Diffuser and has rails for the easy and seamless placement of the false sealing or other connecting equipment.
- • The Aluminum profile is prepared for the integration of the sterile field and O.T.-illumination, when combined with the optional rail system for the O.T. illumination.
HEPA Filters
- • Integrated HEPA Filter-Cells with a frame made out of galvanized sheet steel
- • Optimized standard dimensions
- • Extremely high filter surface for low initial pressure drops
- • EPDM profile gasket
- • Change of filters to the clean side
Sterile Air Diffuser CG
- • Transparent diffuser with double layer micro mesh, made out of specialized textile
- • Assembly and disassembly without screws or tools
- • Air-flow optimized frame made out of Aluminum profile
- • Pass through of the stand of the O.T. light
- • Whole construction to the clean side smooth and without screws
Test port for LAF testing
- • Mounted outside of the aluminum frame system with test connection for DEHS testing and pressure drop, varnished RAL 9016.
- • Filter surface per m² face area 18,5 m²
- • Norms: DIN 1946-4
| Model No | POT 2408 | POT 2406 | POT 1806 |
|---|---|---|---|
| Airflow Volume | 4760 m³/h | 3570 m³/h | 277 m³/h |
| Outer Dimension | W 2400 x D 2400 mm | W 2400 x D 1800 mm | W 1800 x D 1800 mm |
| Height of the Plenum Box | 450 mm | 450 mm | 450 mm |
| HEPA Filter Area | W 2290 x D 2290 mm | W 2290 x D 1710 mm | W 1710 x D 1710 mm |
| Average Velocity | 0.25 m/sec | 0.25 m/sec | 0.25 m/sec |
| No of HEPA Filters | 8 Nos | 6 Nos | 4 Nos |
| HEPA Filter Class as per EN 1822 | H13 | H 13 | H 13 |
| Initial Pressure Drop | 160 Pa | 160 Pa | 160 Pa |
| Final Pressure Drop | 600 Pa | 600 Pa | 600 Pa |
| No for Collar | 6 Nos | 4 No | 4 No |
| Height of Available Ceiling Space (minimum requirement) 550 mm |